all products

all products

Model: SW-SPLTRIM-18 (TRIMMING BOWL MACHINE)

Anyone who deals with their own garden or professionally works with gardens and green spaces, requires excellent equipment.


If you need to separate buds from stems - then you should do this with the Swiftair trimmer. The bud trimmer is also perfectly suited for shredding leaves and small branches.

 

 

The bud trimmer is equipped with a high qualtity electic motor, enabling you to effectively shred, trim, cut and process of plants within a short time. Its high performance allows for you to process even larger quantities. This is furthered by the opening of about 18" in diameter. The engine works very reliably and requires little maintenance.

 

 

There are three rotational speeds.

 

 

The casing is made of stainless steel, ideally suited for plant processing.

 

A lid also ensures that not plant parts will be thrown out of the device during its functioning.

 

For taking in the plant material, the machine is equipped with two removable bags of different sizes, made of meshed net fabric. They can be safely attached to the device so that no leaves or fruit fall to the ground. After use, the bags can be cleaned and stowed easily and quickly.

Model: SAHRU150 (Passive Heat Recovery)
Designed to work with inline fans already installed or purchased separately.
This will then provide adequate ventilation for rooms and will provide up to 75% heat recovery.

Eliminate mould and control condensation.
Spigots
6" 150mm


Model: SW-APOLLO (Fold LED 720w 2.5uml/s / 1800 µmol/s)



Swiftair Apollo Fold 6 Bar Grow light Full Spectrum 720w 2.5 uml/s

In the box:
Apollo Fold LED 720w x 1
UK IEC Lead x 1
RJ14 Network Cable x 1

With the advances in technology and fixture performance, high quality LED lighting is now a option offering significant return. 

The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration without hotspots and excessive heat. 

 Can be used folded making this LED brilliant in corners and getting that light on the sides as well as on top, it can also be folded to a V making it ideal for any roof/loft .

Introducing our new and improved folding 720W LED lighting fixture, Our new LED features the same outputs that made the original our most successful LED unit.

With a PPF of 1800 μmol/s and a fixture efficiency of 2.5 μmol/J, you can expect the same quality of light and improved yield as the original.

It’s 6 bars of high-efficiency LEDs cover a 1.5m x 1.5m area, with outstandingly uniform light coverage.

  The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure.

Backed up by a Two year warranty.

 Total output: 1800 µmol/s

Overall fixture efficiency: 2.5 μmol/J

Diodes - (3V 2835)

 6 bar system – Gives highly uniform coverage (PPFD) across the canopy.

Ideal over a 1.5m x 1.5m area, However for best results use a area of 1.2m x 1.2m

 Full spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.

  Silent running: No fans or moving parts.

 Dimming Settings: 290, 430, 580, 720w & EXT (Controller)

 

Spec's

Full Spectrum

720w

Efficacy: 2.5 µmol/J

PPF: 1800µmol/s

Input Voltage: 120-240V, 50-60Hz

Power Consumption: 720w

LED Wattage: 720w

IP54

Used semi folded - Yes

Lifetime: 50 000 hrs @ 60 C

Light Distribution: 120°

Weight: 14Kg

Dimensions: 112 x 112 x 6 cm

Model: CFLO150 (CFLO250) Large Heat Recovery Unit
Boost switch comes wired to unit (plug straight in)

Designed to run continuously and provide adequate ventilation for a bathroom, en suite, shower room, wet room etc.

Will provide up to 75% heat recovery

Eliminate mould and control condensation
Trickle/Boost Option included
Loft/void space mounting.

Condensation Drain fitted to bottom of Unit
Spigots
6" 150mm 
UK Plug - UK plug attached  

Sizes/Types

150mm (6")

Wattage
Speed (High) - 120w

Air Flow (Free Air)
194m3/hr to 550m3/hr

Sound Level dBA
speed 5 : 54dB(A)
speed 4 : 47dB(A)
speed 3 : 38dB(A)
speed 2 : 34dB(A)
speed 1 : 28dB(A)
Sold Out
This handy 18" leaf trimmer goes together easily. 
Simply insert the legs into the holes provided and attach the mesh catch bag, plug in, and it is ready to use.

Please make sure you wear safety eye wear and tight gloves when operating.

This trimmer has sharp rotating blades that may, through carelessness cause injury to fingers.

Easy to put together & even simpler to use
A quick & effortless way to trim
Compact design only requires 4ft of space
Easily accessed for maintenance
Equipped with a Powerful, efficient and quiet motor

220-240v 50Hz

Designed with auto-shut off when cutting box is opened
Model: SW-BTRIM-16 (Bowl Trimmer)
This trimmer is medium sized (16") with stainless Steel Construction

Helps with trimming roots and leaves 
Can be rotated clockwise and anti-clockwise
Can be dismantled to take up less space 
Easy cleaning
Light weight
Easy to use and carry

Size - 16"
Total dimensions 405 x 400 x 360mm
Weight - 6kg
Model: SW-REFLEC-DUT (Dutch Barn Reflector)
Dutch Barn-Style, Euro Reflector. Included with a lamp holder and cord

The Reflector is a great budget reflector

Wattage
250w, 400w & 600w 

Bulb Fitting

E40 Screw Fitting
Model: SW-DEHPS (Double Ended Dual 1000w Bulb)
Double ended Dual Spectrum HPS bulb 240v - 1000w 
High output with raised spectral discharge in the reds and blues (exactly the right spectral energy distribution curves that your plants need to thrive).
The lamp also has 10,000 life hours and colour temperature of 2100K.

1000w = 151,000 Lumens

Best used with our FlexStar ballast
DE fitting

Codes

SW-DEHPS-1K
Model: SW-FLEXII (Double Ended Light Fitting)
DIMMABLE BALLAST - 600w, 750w, 1000w or 1150w

3-Mode adjustable reflector

Narrow, Medium or Wide

Hammered surface design to ensures the best light output

This double ended ballast and reflector has been made to provide the best possible spread of light over the growing area. 

The FlexStar is a digital ballast that powers a double ended 1000w lamp (lamp not included). 


Types

Digital / DE
Wattage
600w, 750w, 1000w or 1150w

Bulb Options

DE Bulb 1000w
UK Plug - UK plug (Supplied)
Model: ST (Centrifugal Inline Fan)
The ST range is an inline Centrifugal Fan with attached bracket which can be used for supply or extraction.
This fan is perfect for longer duct runs and carbon filters.
UK Plug - Standard Model Only

Sizes/Types

100mm (4") - ST100
Standard - S
Wattage
100mm (4") - 20w
Air Flow (Free Air)
100mm (4") - 110m3/hr (30l/s)
Sound Level dBA
100mm (4") - 35
Circular Trellis Metal Supports 48cm 60cm 75cm


This Grow It Conical Plant Support offers maximum support to plants in beds and containers. It is easy to use and will hold heads high, making them ideal for all long stemmed plants.

 

Allows plants to grow through the ring

Dark green plastic coating blends easily with foliage

Made from tough and durable steel

With added protective rot resistant plastic coating

 

Sizes available

48cm (19") - Dia. 18cm

60cm (24") - Dia. 26cm

75cm (29") - Dia. 32cm

Plagron Sugar Royal
Plagron Sugar Royal
Best smell and taste
Reduces the cultivation period
Sugar Royal is used in plant cultivation for enhancing the natural flavour and taste of the final product. It is an addition to use alongside the basic nutrient. The natural processes of the plant during the flowering period will be supported and challenged by using Sugar Royal.
 
Dosage and use
Shake well before use. Add a maximum of 1 ml of Sugar Royal per 1 litre of water (1:1000). Use this nutrient solution from the second week of growth, every time you water your plants.
 
NPK
NPK fertiliser (9-0-0).
Nitrogen 9%
Plagron Pure Zym/Enzym
Plagron Pure Zym
Gives protection against the build-up of harmful salts
Increases oxygen absorption capacity
Rapid intake of nutrition for strong growth and flowering
Pure Zym is a soil improver based on natural enzymes. It promotes the accelerated breakdown of dead plant material. This causes additional nutrients that stimulate soil life to be released. Pure Zym also increases the ability to absorb oxygen.
 
Dosage and use
Shake well before use. Add 1 ml of Pure Zym per 1 litre of water (1:1000). Use this solution each time the plants are irrigated during the entire cultivation period.
 
Characteristics
Stabilised enzyme solution.
Plagron Power Roots

Plagron Power Roots

Fast and vigorous root development

Rapid recovery after being transplanted

Suitable for all types of watering systems

Improves uptake of nutrients and the soil structure

 

Power Roots is a root stimulator. This stimulator is used in the growth phase and the initial weeks of the flowering phase. Power Roots stimulates root growth and increases the resistance of the plant. It works quickly, is economical and is absorbed by the plant virtually immediately. Power Roots ensures the development of strong plants. 

 

Dosage and use

Add 1 ml of Power Roots per 1 litre of water (1:1000). Use this solution each time the plants are irrigated until the fourth week of the flowering phase 

Characteristics

NPK fertiliser (0-0-2)

Plagron Hydro A&B

Plagron Hydro A&B

Highly concentrated hydroponic system nutrient for the growth phase of the plants life. Suitable for all hydroponic grow systems.

Use a combination of the organic and mineral elements.

(if you select 1L A&B you will receive 1L of A and 1L of B)

(if you select 5L A&B you will receive 5L of A and 5L of B)


 

Plagron Alga Grow/Bloom

Plagron Alga 

GROW

Alga Grow contains precisely balanced ratio of nitrogen, phosphates and potash that the plants can directly absorb and which optimise growth in a purely natural manner.

 

BLOOM

Alga Bloom is an organic mineral liquid nutrient. It contains precisely balanced ratio of phosphates and potash that the plant can directly absorb so that the flowering is optimised on a completely natural basis. 

Plagron Terra Grow/Bloom

Plagron Terra

GROW

Highly concentrated  universal feeding for growth.

Suitable for all types of potting soil.

Builds up plant mass providing the basis for good flowering and fruit formation.

BLOOM

Highly concentrated universal feeding for flowering. suitable for all types of potting soil.

Builds up pant mass providing the support for optimal flowering and fruit formation.

Plagron Green Sensation

Green Sensation is a powerful booster that guarantees a high yield. 
This stimulator was developed especially for the final 4 to 6 weeks of the flowering phase. 
Because of its well-balanced composition Green Sensation provides all the nutrients the plant needs. 
It ensures profuse flowering and cropping, a hard cell structure and the very best flavour.

Instructions

Shake well before use. Add 1 ml of Green Sensation per 1 litre of water (1:1000). After this, add the basic nutrient until the desired EC value is reached. Use this nutrient solution each time the plants are irrigated. This stimulator was developed especially for the final four to six weeks of the flowering phase.

Composition

EC FERTILISER. PK-fertiliser solution (0-9-10). 9% Water-soluble phosphorus pentoxide (P2O5), 10% water-soluble potassium oxide (K2O).

Packaging

Green Sensation is available in  250ml, 1L and 5L bottle. 

Model: SW-ANTIDETECT (Anti Detection Foil ADF Sheeting)

Benefits:

 

88% Light reflection
94% Heat reflection
100% moister proof
100% light proof
Certificate on light and heat reflection: TNO Official Dutch research institute.
Tear proof product
Extra coating
Model: SilverDia (Silver Diamond Sheeting 1.2m)

Silver Diamond

Product Specification:
Diamond diffused pattern to spread light more evenly. Produced to help eliminate grow room hot spots.

PET coated to protect against corrosion and wear.

With "Membrane Memory" to dramatically reduce creasing effect.

Bamboo Stakes 3ft 4ft 5ft 6ft

Please select size from drop down menu above

3ft 4ft 5ft - Pack of 20

6ft - Pack of 10

Natural Finish

Use indoors or outdoors

Strong and durable

Lightweight stakes have smooth, attractive finish

Model: STUBE P (Plastic Centrifugal Inline Tube Fan)
Designed for inline mounting into any point of the ventilation system and at any angle. For supply and exhaust ventilation, The fan casing is made of high quality durable plastic.
Single-phase ball bearing motor equipped with a centrifugal impeller with backward curved blades. It is implemented with overheat protection with automatic restart.
Wall and ceiling mounting is carried out using the bracket
Can be speed controlled using a thyristor or transformer speed regulator.
IP44

Sizes/Types

100mm (4") - STUBE100P
125mm (5") - STUBE100P
150mm (6") - STUBE100P
200mm (8") - STUBE100P
250mm (10") - STUBE100P
315mm (12") - STUBE100P
UK Plug - No
IEC Attachment - Yes (UK Plug lead not provided)
Wattage
100mm (4") - 52w
125mm (5") - 52w
150mm (6") - 85w
200mm (8") - 135w
250mm (10") - 210w
315mm (12") - 225w
Air Flow (Free Air)
STUBE100 - 265 m3/h
STUBE125 - 370 m3/h
STUBE150 - 680 m3/h
STUBE200 - 900 m3/h
STUBE250 - 1100 m3/h
STUBE315 - 1700 m3/hr
Sound Level dBA
100mm (4") - 52
125mm (5") - 51
150mm (6") - 57
200mm (8") - 55
250mm (10") - 53
315mm (12") - 53
Model: SW-CONAVM (Anti Vabrite Connector)

CONAVM flexible insert is designed to eliminate vibrations in ventilation systems that occur during the operation of air handling units and other devices connected to air ducts and fittings.

CONAVM is made of galvanized steel and polymer fabric, it is operated at temperatures from -40 to +50 degrees.

Model: SW-MC (Metal Padded Clamp)

Comes in 4", 5", 6", 8", 10", 12" 

Equipped with a rubber guarding gasket and a universal screw-nut (M10 to M8).

Designed for wall or ceiling mounting of the ducts of the corresponding diameter.

Model: SW-SHUTVA (Metal Shut off Valve)

Manufactured from galvanized steel. 

Used to control the flow rate of systems with a working pressure not exceeding 1500 Pa.

The Handle is used as an actuating device (manual control).


Model: SD (Roof Fan with Cowl)

Main features:

  • ABS plastic
  • ball bearings
  • IPX4
  • maximum operating temperature 40°C
  • 1 years warranty

SD-series roof fans are designed for ventilating utility buildings, as well as warehouses with a low level of air pollution.

Fans designed for vertical operation are adapted for installation on roofs with a maximum pitch of 15°.

They have a much-higher compression than traditional fans, so they can work with central exhaust-ventilation systems.

Thanks to the use of 3-speed motors, it is possible to adjust the fan’s parameters to the user’s needs, depending on the connection method.

Model: SW-UHE2KW (2kw Heater)

Product Overview

 

Keep warm this winter with the 2kW Upright or Horizontal Fan Heater.

This versatile electric heater is at ease working as a vertical heater or a flat heater - and with a 2kW maximum output, it is most at home heating compact spaces - or use it under your desk to warm your legs.

On warmer days, this small fan heater comes with a fan mode to cool your surroundings. 

 

2 Heat Settings: 1000/2000W

Cool/Warm/Hot settings

Adjustable room thermostat

Automatic temperature control

Overheat protection

Power indicator light

 

Model: SVU400HT MEV (Whole House Extract Unit)

The SVU400 central fan is designed for the continuous and quiet ventilation of rooms. It can be used in houses and flats, as well as in conference rooms, offices and public buildings.

The unit is equipped with an energy-saving motor, which enables operation at three performance levels. Its construction allows the connecting of up to seven inlet ducts with a diameter of Ø75 mm, and one Ø125 mm duct intended for connecting a extractor hood.

The CVU400 is comes with humidistat, which automatically adjusts the efficiency of the fan to the prevailing humidity. The simple device design allows for its quick installation and maintenance (cleaning) without using complicated tools.

The design of the CVU central fan allows it to be mounted on the wall or ceiling in both horizontal and vertical positions.

 

The humidity sensor has an operating range of 0% to 100%. The humidity level should be adjusted on the front part of the fan casing. The fan will start in trickle. When the humidity rises above the value set, the fan will automatically increase the speed to Boost (Full Speed). After the humidity drops below the set value, the fan will return to operation in trickle.


Wattage
54/55/60

Air Flow (Free Air)
Speed 1 – 265 m3/hour
Speed 2 – 360 m3/hour
Speed 3 – 415 m3/hour
PA
435/495/535

Sound Level dBA
44/49/56 dB(A)
IP
X2
Model: SR (Semi Rigid Ducting)

An extremely flexible reinforced aluminium foil flexible supply or extract ventilation ducting.

Multi-ply aluminium and polyester laminate construction supported by a high tensile steel wire helix.

 

Model: AG FR (Fire Rated Air Valve)

The Fire Rated Ceiling Valves have been fire tested to BS EN 1365-2:1999 by The Building Test Centre in a full scale horizontal loaded timber joist floor and the ceiling and floor construction with the valves installed, achieved a Fire Rating of over 60 minutes.

 

The Fire Rated Ceiling Valves are available in both Supply and Exhaust configurations and incorporate integral intumescent materials. During a fire, the intumescent material expands and closes the aperture of the valve, re-instating the fire resistance of the structure.

 

Suitable for both supply and exhaust air

 

T-Roks (Bigger and Heavier Flowers)

Stimulate and enhance flowering and improve size and quality of yield.

T-Roxs is an enhancer that can be used from week 2 of flowering for a maximum of 10 days.

Designed to enhance flowering when used during this specific period. A safe, natural material that’s based on plant extracts – without artificial PGRs.

T-Roks pushes flower bud formation to the limit at its vital early stage of growth, meaning early formed flowers end up bigger and heavier.


Benefits

Improve size and quality of flower yield.

Reduced growing periods.

Natural extracts.


Directions:

Ensure all equipment is CLEAN and free of residues from previous use.

SHAKE OR STIR THOROUGHLY before SLOWLY adding the required quantity to fresh solution.

MIX WELL before use and make up a solution for one week’s use, then top up as necessary.

 

Application:

End of 2nd Week (Flower)

10 Days Max - 1.5ml/L

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

0.27% as MgO

0.17% Mn

Specific L-Amino acid hormone analogues

1.1% Free Amino acids from plant fermentation

0.6% Humic acid

Betaines

0.15% Fulvic acid

Oxo-pyro-glutamic acid

2.2% Natural algal extract, rich in gibberellins and cytokinins

NPK: 2.3-2.9 (1.8 as PHOSPHITE) – 4.1

Lightning Roots (Root Stimulator)

Supercharge your roots with Lightning Roots!

Turbo-charged formula to speed-up root growth with increased water & nutrient uptake thanks to longer, heavier and more efficient roots.

Lightning Roots uses entirely natural components to tilt hormone production in favour of root growth.

Bigger roots take up nutrients more efficiently, absorb water more effectively and provide better anchorage for your plant.

A safe, natural material that’s based on plant extracts – without artificial PGRs. Its oligosaccharides work in conjunction with other sugars and amino acids to stimulate your plant’s root zone.


Benefits

Increase stress resistance.

Epic root growth.

Faster growth development.


Directions:

Ensure all equipment is CLEAN and free of residues from previous use.

SHAKE OR STIR THOROUGHLY before SLOWLY adding the required quantity to fresh solution.

MIX WELL before use and make up a solution for one week’s use, then top up as necessary.

 

Application:

Weeks 1-4 (Veg)

Weeks 1-2 (Flower)

1ml/L

 

You can use beyond if needed

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

0.15% Amino Acids

8.6% Plant extracts

0.9Lignin salts

3%Glucose surfactant

0.5% Glycerol

Humic Acid<0.1%

Lignosulphonates 0.8%

Chaos (30% Booster)

Chaos from Swiftair is the formless matter supposed to have existed before the creation of the universe. 

Fortunately, the only creation this booster will be part of is the battle to create excessive amounts of weight to your crop.

A blooming formula (for weeks 6-7)

Plant-sourced amino acids, humates, lignins and sugars to enhance yield, health and flavour.

Specifically designed for use late-on in the growing cycle, it stimulates bulking up of flower components over their final 3 week.

Based on plant extracts without artificial PGRs. Using bioactivated Potassium in both Thiosulphate and Phosphite forms, combined with specific amino acids and other plant extracts.

 

Benefits

Late Mass builder.

 Plant booster.

 Increases yield up to 30%.

 

Directions:

Ensure all equipment is CLEAN and free of residues from previous use.

SHAKE OR STIR THOROUGHLY before SLOWLY adding the required quantity to fresh solution.

MIX WELL before use and make up a solution for one week’s use, then top up as necessary.

 

Application:

Use only in either week 6 or 7 of flowering:

Use 2ml/L - for 1 week only.

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

N – 7.1%

P2O5 – 4%

K2O – 8%

MgO – 2.0%

Amino Acids – 2.3%

Sold Out

Swiftair single speed or variable (EC Only) sound insulated fans are designed and constructed to minimalize sound output at range which makes them the ideal grow room inline fans for where noise sensitivity is a priority.

Airflow capabilities:

Powerful with engineered high-quality motors run extremely quiet while moving a very large amount of air through either a 150mm, 200mm, 250mm and 315mm outlet. The outer casing functions as a silencer and has a thick layer of insulating foam-lining around its inside, providing outstanding sound protection. 

Swiftair fans can be suspended/ installed in locations that may be unsuitable to consider other, heavier, cabinet/box type acoustic fans. 

The speed controller (EC Only) offers the ability to reduce air-flow levels when it may be preferable, providing added flexibility and saving money on additional fan-controller units!
These fans are highly reliable, durable and overheating is prevented by a thermal switch, so peace of mind can be maintained at all times.

 

Sizes/Types

150mm (6")

200mm (8")

250mm (10")

315mm (12")

 

AC - UK Plug Attached

EC - Speed Controller and UK Plug

 

Wattage

 

200mm (8") - 120w AC

250mm (10") - 153w AC

315mm (12") - 334w AC

 

150mm (6") - 41w EC

200mm (8") - 120w EC

250mm (10") - 153w EC

315mm (12") - 334w EC

 

Air Flow (Free Air)

 

150mm (6") - 550m3/hr (150 l/s)

200mm (8") - 1000m3/hr (277 l/s)

250mm (10") - 1660m3/hr (461 l/s)

315mm (12") - 2760m3/hr (766 l/s)

 

To calculate how big a fan you will require: 

Simply multiply the length x width x height of your grow room in metres which will give you the cubic capacity of your room and then multiply that value by either 30 or 60 which is the minimum and maximum air changes required per hour for optimum ventilation in your grow room.

For example : A grow room measuring 2mtrs x 2mtrs x 2mtrs = 8mtrs cubed x30 air changes an hour = 240mtr cubed per hour will need to be ventilated ..as a rule we recommend buying a slightly larger capacity fan than you need, to allow for summer increases in temperature and or using a Carbon filter. 

 

Phonetic Ducting Ultra Silent
The SW-PHON 10m Phonetic Ducting Ultra Silent includes a Polypropylene fabric cloth inner duct, thermally insulated layer and a black Alu/PVC outer jacket designed for use in air-conditioning systems, air supply systems, ventilation systems and machine noise reduction.
It offers a maximum 2,500 pascals operating pressure and 25 m/s maximum air velocity with a standard diameter range of 102 to 406 mm and a fixed length of 5m.
PK Rage 18/20 Nutrient

A 3-in-1 concentrated formula

Nutrition in flowering plants, maximises flower buds and enhances flowers.

PK Rage is a biostimulant that enhances and extends the flowering period. 

More concentrated than most competitor products yet still a true solution, with no suspended insolubles.


A safe and natural product without PGR’s, it is uniquely concentrated in order to yield unstoppable results.

 

Benefits

Triggers an increase in flowering sites.

Causes fruits to swell-up in size.

Increases the weight.

Can be used with any base nutrient.

 

Direction of Use

Week 4-5 - 0.3ml/L

Week 6-7 - 0.5ml/L

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

Calcium – 0.5%

Magnesium – 0.3%

Phosphorus (P2O5) – 22%

Potassium (KO) – 17%

Model: SW-MMAKER-13L (Ultrasonic Humidifier)

The Swiftair Ultrasonic Humidifier 13L Tank

- 600ml per hour

- Mist Nozzle

- Controller

- Control the amount of humidity

- Timer (1 to 12 hours)

- Water Shortage Shutdown

- 48w / 50hz / 220-240v

 

 

Model: SW-MMAKER-5L (Ultrasonic Humidifier)

The Swiftair Ultrasonic Humidifier 5L Tank

- 300ml per hour

- Control the amount of humidity

- Timer (1 to 12 hours)

- Water Shortage Shutdown

- 28w / 50hz / 220-240v

 

 

Model: SW-AD (Door Hatch)
For access to fans, pipes or any items that require to be hidden.
Designed for wall or ceiling mounting.
Open and close by press.
The possibility of universal installation for the left or right-side opening.
Can be used in high-humidity.
Made of high-quality ABS-plastic.

SW-AD1515 - 168 x 168mm (Door Dimensions 146 x 146)
SW-AD2020 - 218 x 218mm (Door Dimensions 196 x 196)
SW-AD3030 - 318 x 318mm (Door Dimensions 296 x 296)
SW-AD3535 - 368 x 368mm (Door Dimensions 346 x 346)

Thickness - 24mm (including flange)

Mounted with glue or cement

Colour: White
Model: SW-TRIMBIN-TK
Sold Out
Trim King Work Tray Product Details:
the Trim King Work Tray is a clever and ergonomic designed tray that makes trimming process become - quick and comfortable. Trim King brings you stress free trimming sessions and high yields. Ultra portable the Trim King will keep your trimming area efficient and tidy.

Designed so it can put on a table, your lap or sofa – allowing you to manicure your flowers, herbs and garden cuttings in comfort, as the 150 Micron Maya Mesh Screen below – collects pollen and separates seeds below in the pollen collection tray.

Trim King Work Tray benefits include:
1 top bin with 150 micron Maya Mesh Screen
1 bottom bin pollen collection tray
Moulded high walls to keep your work contained
Constructed from recycled plastic
Portable and easy to clean
Model: SW-PMB
Exhaust Portable fan: it is widely used in a bad air environment, such as basement, tunnel, warehouse, mining ventilation equipment, dust and hot gas generated by welding and smoke exhaust, etc. 


8" 200mm - 120w - 1500m3/hr - UK plug
12" 300mm - 322w - 3600m3/hr - UK plug
16" 400mm - 1100w - 5760m3/hr - Needs Wiring
20" 500mm - 2000w - 12000m3/hr - Needs Wiring

Ducting can be attached if required 
Model: SW-CLHOOD (Cool Hood Reflector)
The Cool Hood reflector is sealed with slide-in gasketed glass constructed with heavy duty pre-galvanized steel

-Made from premium highly reflective aluminum
-pre-wired lamp cord
-Comes with built-in socket, and hanging hooks
-Can be connected straight to a Ballast
-Bulb in picture not included

Spigot Size - L x W x H

150mm (6")  - 59cm x 42.5 x 18cm
Wattage
250w, 400w & 600w

Bulb Fitting

E40 Screw Fitting
Model: SW-TUBE (Cool Tube Reflector)
The cool tube reflector is perfect to keep those temperatures down.

-Internal and external reflectors included
-Made from premium highly reflective aluminum
-Comes with built-in socket and pre-wired lamp cord
-The lamp is not included in the system

5" 125mm - 45cm Long
6" 150mm - 65cm Long
8" 200mm - 75cm Long

Spigot Size

125mm (5") - SW-TUBE-5125
150mm (6") - SW-TUBE-6150
200mm (8") - SW-TUBE-8200
Wattage
250w, 400w & 600w - 5" & 6"
250w, 400w, 600w & 1000w - 8"

Bulb Fitting

E40 Screw Fitting

Model: QBF (Quiet Box Fan)
Quiet Box Fan (QBF) fan design allows for supply and extract ventilation for areas/rooms with high requirements to low noise levels and limited mounting space. Units can be installed above ceilings or in loft spaces. Suitable for round ducts. The centrifugal impeller with back-curved blades is powered by means of 2-pole asynchronous motor with external rotor. The motors are equipped with built-in thermal overheating protection with automatic restart. 

Sizes/Types

100mm (4") - QBF100
125mm (5") - QBF125
150mm (6") - QBF150
200mm (8") - QBF200
250mm (10") - QBF250
315mm (12") - QBF315
Standard - S
UK Plug - Standard Model Only
Wattage
100mm (4") - 63w
125mm (5") - 63w
150mm (6") - 112w
200mm (8") - 170w
250mm (10") - 173w
315mm (12") - 221w
Air Flow (Free Air)
100mm (4") - 240m3/hr (67l/s)
125mm (5") - 330m3/hr (92l/s)
150mm (6") - 420m3/hr (117l/s)
200mm (8") - 730m3/hr (203l/s)
250mm (10") - 1300m3/hr (362l/s)
315mm (12") - 2150m3/hr (598l/s)
Sound Level dBA
100mm (4") - 33
125mm (5") - 35
150mm (6") - 36
200mm (8") - 38
250mm (10") - 41
315mm (12") - 43

Login