Tent & Growroom

Tent & Growroom

Model: SW-SUL (Sulphur Heater Hot Box Fumer Pests)

Technical

Size - 13x13x20cm - 0.65kg

Output - 150w (start) - 60w

 

Controls all kinds of pests and fungal diseases like mildew, botrytis, black rot, mites, insects, enzymic diseases etc.

The Sulphur heater is used in areas with vegetables and flowers grown in tents or greenhouses, and will control pests in almost any environment. 

 

Installation Instructions

Hang the heater in the middle of the room and plug it in to the mains (60-100m2)

Remove all traces of old sulfur in the container and do not use more than 24g of sulphur each time.

Make sure the cup is on the heater plate correctly

When diseases or pest appear for best results use the heater for 4 to 5 hours during lights off

Using a timer is advised

*****

Heating sulphur can be harmful so please be careful

Make sure unit is off when refilling and left to call down

Do not use flammable chemicals or sulfur with a purity below industrial grade

-----

Running times:
You should run your Sulphur Box every other night for 2 weeks:
Night 1: 6 – 8 hours
Night 2: 2 hours
Night 3: 6 – 8 hours
Night 4: 0 hours
Night 5: 2 hours (most infestations) 6 – 8 hours (serious infestations)
Night 6: 0 hours
Night 7: 2 hours
Night 8: 
0 hours
Night 9: 
2 hours
Night 10: 
0 hours
Night 11: 
2 hours
Night 12: 
0 hours
Night 13:
 2 hours
Nights 14: 0 hours
Caution:
• Do not use during the last 2 weeks of harvest/fruiting otherwise your plants may be damaged.

 

Model: Insect Catcher (11
Accurately detect and monitor flying insects with this 10-pack of dual-sided sticky glue sheets.
Use these fly traps to form part of your integrated pest management (IPM) protocol to spot and stop pest infestations before they start.
Form a tight cone around your plant's stock with the Pad. Slowly remove the release paper and overlap the pad's slit to create the shape and size you want. 
Position the Lock Down Pad with the adhesive side up or down in the desired container. Remove the protective covering from the adhesive.


Sold Out
Accurately detect and monitor flying insects with this 5-pack of dual-sided sticky glue sheets.
Use these fly traps to form part of your integrated pest management (IPM) protocol to spot and stop pest infestations before they start.


Model: Proguard DXB Mini with BPI (Sanitization Unit)

Description

Defender DXB Mini (25sq metre coverage) with BPI has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high-load environments in greenhouses using the ProGuard Sanitization Technology.

Manual / installation instructions

How does it work

ProGuard technology helps growers proactively eliminate microbial contaminants (used extensively in large commercial facilities where passing stringent testing regulations is a prerequisite to keeping their licence!).

Proguard’s patented process pro-actively sends out powerful sanitisers that seek out and destroy mould spores, mildew and harmful pathogens in the air and on the plants, the lights, the benches, and other surfaces - giving you the 24/7 protection that results in a cleaner room environment and a cleaner product.

Why do grow rooms need an air sanitiser?

An air sanitiser can prevent mildew and moulds that are harmful to your plants.  If you’ve ever dealt with powdery mildew, you know why growers need air sanitation. Since grow rooms tend to have high humidity, they're highly susceptible to powdery mildew and other moulds, plus pathogens that can destroy crops quickly.

In short, powdery mildew can fuck your shit up. Here are a few reasons how they do that:

  • Powdery mildew spores can be carried by the wind, air exhaust and ventilation systems, pets, and even growers and employees. Practically any living organism can transport the fast-spreading mildew.
  • Mildew spores can stay dormant until environmental conditions are just right for them to thrive. Powdery mildew has a 4-7 day post-inoculation window. During that time it’s practically invisible, so it’s hard to know when powdery mildew or other moulds are waiting to appear, reproduce and spread.
  • Powdery mildew is able to depress the photosynthesis process of plants significantly. That means your plants won’t take up nutrients and energy as efficiently for healthy growth.
  • Powdery mildew can affect seedlings, clones, veg plants, and flowering plants.
  • Most fungicidal sprays that may be able to treat powdery mildew, other moulds, and mildews have a detrimental effect on bud quality and safety. Regulations bar the use of many that otherwise would be effective.
  • Crops affected by powdery mildew are harmful to consume. The plants are likely to fail regulatory testing for mould content.

Air sanitisers in grow rooms are an advance that’s been added to best commercial practices. Sanitisers effectively “clean” the air of harmful pathogens and spores for optimal environments.

The most effective indoor air sanitisers, including ProGuard, use UV energy and other technology, transforming moisture molecules in the air into an ionized vapour that can kill pathogens. By contrast, some other air sanitation models emit potentially hazardous gases or chemicals into the air as they claim to be purifying it. However, there is a difference with Proguard.

The ProGuard Difference

Innovative Solutions’ ProGuard systems use a process called Active Sanitization Distribution. It distributes the sanitizing effect into the environment, killing pathogens at their point of origin, both in the air and on surfaces #SeekAndDestroy

The ProGuard™ air sanitiser was designed specifically for commercial grow rooms that are naturally high-density and high-humidity. Through a photocatalytic oxidation process, UV energy and a proprietary catalyst turn air moisture molecules into an ionized, mild form of hydrogen peroxide vapour that actively kills pathogens up to 99.9%, reducing mould and mildew threats. The result is an optimally clean environment that promotes plant health and helps crops pass microbial regulatory testing.

The ProGuard DXM Mini has been designed for grow rooms and dry rooms up to 250 square feet (circa 25 square metres) the DMX Mini can also benefit other smaller spaces, such as hallways. The power draw is a meagre 14 watts.

When greenhouse facilities look at the cost of losing an entire crop versus the cost of a system that can prevent the loss, the decision is easy. 

DXB Mini with BPI is easy to install and maintain as it operates 24/7. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and effectiveness in reducing mould, mildew, bacteria, viruses, voc’s and other dangerous pathogens.

Product Specifications
• Weight of Unit: 2.75 lbs.
• Dimensions (H x L x D): 10” x 10” x 4”
• Electrical Input: 100-240V – 50/60Hz
• Electrical Output: 12VDC 3A
• Power Consumption: Running 14W – 22W
• Warranty: 2 Years

Model: SW-ANTIDETECT (Anti Detection Foil ADF Sheeting)

Benefits:

 

88% Light reflection
94% Heat reflection
100% moister proof
100% light proof
Certificate on light and heat reflection: TNO Official Dutch research institute.
Tear proof product
Extra coating
Model: SilverDia (Silver Diamond Sheeting 1.2m)

Silver Diamond

Product Specification:
Diamond diffused pattern to spread light more evenly. Produced to help eliminate grow room hot spots.

PET coated to protect against corrosion and wear.

With "Membrane Memory" to dramatically reduce creasing effect.

Login