Extract Fans

Extract Fans

SA Extractor Fan Range Bathroom

SA is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwated drafts from entering from outside.

IP Rating: IP24


Types/Spigot Size

SA100 - 100mm (4")
SA125 - 120mm (5")
SA150 - 150mm (6")

Standard Model (S) - Turns On/Off 

Timer Model (T) - When switched off will run on for the time set

Humidity Model (H) - Turns on and off with Humidity - If Switched Live is added fan will turn on for the time set then off (even if power is still applied to T Terminal) once light is turned off fan will run again for the time set then off.

Pull Cord (P) - Turns On and Off via the Pull Cord attached to fan, Perm LIve and Neutral Needed

 



Wattage
100 - 14w
125 - 16w
150 - 16w
Air Flow (Free Air)
100 - 97 m3/hr
125 - 183 m3/hr
150 - 290 m3/hr
Sound Level dBA (3m)
100 - 35
125 - 36
150 - 38

Model: SCT (Continuous Eco dMEV)

Swiftair 4"/5” Axial Continuous Running Fan SCT

 

100mm / 125mm continuous running panel axial fan for bathrooms and kitchens.

Discreet styling with flat facia reducing the impact the fan has on interior design.

Suitable for wall or panel mounting using the appropriate fixing kit.

Designed to comply with Building Regulations for whole house system ventilation, this sleek fan can be used in a wet room under System 3 of Building Regulations Approved Document F.

This attractive fan is also very energy efficient.

 

Why choose continuous running fans?

Continuous running fans, like the Continuous range, have been designed to meet the requirements of the Building Regulations for bathrooms, kitchens, utility rooms and toilets (other models available).

The fan is designed to run all of the time, keeping homes fresh, healthy and free from condensation.

 

What does it do?

The fan is designed to run continuously at a very low rate and boost automatically when required.

The low running rate means it has extremely low noise levels.

 

How will it help?

This fan will help prevent the build up of moisture in the home by removing steam and odours.

This will help reduce the risk of black mould forming on walls and behind cupboards.


220-240 V/AC. 50Hz single phase powering a low energy motor.

These fans are double insulated and do not require an earth.

All wiring must comply with current IEE regulations.

 

IP Rating

IPX4


Types/Spigot Size

SCT100 - 100mm (4")

SCT125 - 120mm (5")


Models - Timer (T) & Humidistat (H)

Wattage

100 - 4/6w

125 - 6/8w


Air Flow (Free Air)

100 - 42/70 m3/h

125 - 55/100 m3/h


PA

100 - 11/15

125 - 6/12


Sound Level dB(A)

100 - 26/32

125 - 24/32


 

Standard

The standard fan can be connected in two ways:

Continuous operation: In this mode, the fan will always be on. The second gear can be turned on and off using a separate switch installed in the power line.

Switchable: In this mode, the fan can be turned on and off completely. To do this, use a double switch, where each key controls a different gear.

 

Timer

Fans with a timer (T) can be connected in the same two ways as the standard fan. In addition, the timer allows you to set the fan to turn off after a certain amount of time. The default setting is 30 minutes, but this can be changed.

 

Humidity

Fans with a humidity sensor (H) will automatically switch to the second gear when the humidity level in the room exceeds 70%. The fan will switch back to the first gear after 15 minutes if the humidity level drops below 70%.

 

PIR

Fans with a motion sensor (R) will automatically switch to the second gear when they detect movement in the room. The fan will switch back to the first gear after 15 minutes if the motion sensor does not detect any movement.

 

Model: STY (Wall/Ceiling Extractor Fan)

STY is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwated drafts from entering from outside.

IP Rating: IP24


Types/Spigot Size

STY100 - 100mm (4")
STY125 - 120mm (5")
STY150 - 150mm (6")

Standard Model (S) - Turns on and off, Live and Neutral needed

Timer Model (T) - When switched off will run on for the time set

Humidity Model (H) - Turn on and off with Humidity if Switched Live is added fan will also turn on and off with switch. 

Humidity can be wired to just work with humidity if needed



Wattage
100 - 14w
125 - 16w
150 - 16w
Air Flow (Free Air)
100 - 100 m3/hr
125 - 183 m3/hr
150 - 290 m3/hr
Sound Level dBA (3m)
100 - 32
125 - 36
150 - 38

Model: SNI (Brushed Extractor Fan)

The SNI range is designed to complment stylish bathrooms, with an unobtrusive, sleek design.

IP Rating: IPX4

Types/Spigot Size

SNI100 - 100mm (4")

Models - Timer (T) & Humidistat (H)

Wiring diagram 

Wattage
100 - 13w
Air Flow (Free Air)
100 - 88 m3/h

Sound Level dBA (3m)
100 - 37
PA
38


Window Trickle Vent

Window Trickle Vents

Mounting without drilling
Air supply is adjusted with a special slider regulator
Filter blocks off any dust from the outside


WHAT EXACTLY IS A TRICKLING VENT?

The window trickle vent is a great option for passive ventilation and air circulation in double-glazed windows or doors. By reducing moisture and condensation, these vents can also prevent the formation of wet spots and ugly black mildew/Mould. With their ability to deliver fresh air without the need for open windows or doors, trickle vents are a valuable addition to any room.

 

ENHANCE YOUR HOME'S INDOOR AIR QUALITY WITH NO-DRILLING TRICKLE VENTS WITH BUILT-IN FILTERS FROM OUR SHOP!

As a provider of exceptional ventilation solutions, we prioritize meeting our customers' home air flow needs. Our no-drill vents are crafted with premium materials and are designed for effortless installation, ensuring a swift and convenient process. Our diverse assortment of vents caters to all rooms in your home, delivering fresh and purified air with our incorporated filters. 

No-Drilling Trickle Vents with Filters for Cleaner Air

Click here for installation information 

 

Can be purchased from:

www.fans4less.co.uk

 

Model: SFP (Plate Fan)
The SFP range is a Commercial Plate Axial Fan perfect for Kitchens, Warehouses, Sports halls, and large areas where high extract rates are needed a low pressure
The SFP Comes in various sizes ranging from 230mm to 480mm

Types/Spigot Size

SFP200 - 230mm
SFP250 - 280mm
SFP300 - 330mm
SFP350 - 380mm
SFP400 - 430mm
SFP450 - 480mm


Pole

SFP200 - 2 Pole

SFP250 - 2 Pole

SFP300 - 2 Pole

SFP350 - 4 Pole

SFP400 - 4 Pole

SFP450 - 4 Pole

 

Wattage

SFP200 - 55w (0.25 A)
SFP250 - 80w (0.36 A)
SFP300 - 145w (0.66 A)
SFP350 - 135w (0.61 A)
SFP400 - 180w (0.82 A)
SFP450 - 250w (1.14 A)
Air Flow (Free Air)
SFP200 - 890 m3/hr
SFP250 - 1100 m3/hr
SFP300 - 2300 m3/hr
SFP350 - 2600 m3/hr
SFP400 - 3830 m3/hr
SFP450 - 4800 m3/hr
Sound Level dBA (3m)
SFP200 - 50
SFP250 - 60
SFP300 - 61
SFP350 - 62
SFP400 - 63
SFP450 - 64
Model: SD (Roof Fan with Cowl)

Main features:

  • ABS plastic
  • ball bearings
  • IPX4
  • maximum operating temperature 40°C
  • 1 years warranty

SD-series roof fans are designed for ventilating utility buildings, as well as warehouses with a low level of air pollution.

Fans designed for vertical operation are adapted for installation on roofs with a maximum pitch of 15°.

They have a much-higher compression than traditional fans, so they can work with central exhaust-ventilation systems.

Thanks to the use of 3-speed motors, it is possible to adjust the fan’s parameters to the user’s needs, depending on the connection method.

Model: SWQ (IPX5 Silent Wall/Ceiling Extractor Fan)

SWQ is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwated drafts from entering from outside.

IP Rating: IPX5

Types/Spigot Size

SWQ100 - 100mm (4")

Models - Timer (T)

Wiring Diagram 


Wattage
100 - 8.4w
Air Flow (Free Air)
100 - 90 m3/hr
Sound Level dBA (3m)
100 - 26
SDISC Extractor Fan

SDISC is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwated drafts from entering from outside.

It comes with 4 coloured rings - White, Red, Green, Yellow & Blue 

IP Rating: IPX4


Types/Spigot Size

SDISC100 - 100mm (4")


Standard Model (S) - Turns On/Off 

Timer Model (T) - When switched off will run on for the time set

Humidity Model (H) - Turns on and off with Humidity - If Switched Live is added fan will turn on for the time set then off (even if power is still applied to T Terminal) once light is turned off fan will run again for the time set then off.

Wiring diagram 


Wattage
100 - 17w
Air Flow (Free Air)
100 - 105 m3/hr
Sound Level dBA (3m)
100 - 35
Model: SNB (White Extractor Fan)

The SNB range is designed to complment stylish bathrooms, with an unobtrusive, sleek design.

IP Rating: IPX4

Types/Spigot Size

SNB100 - 100mm (4")

Models - Timer (T) & Humidistat (H)

Wiring diagram 

Wattage
100 - 13w
Air Flow (Free Air)
100 - 88 m3/h

Sound Level dBA (3m)
100 - 37
PA
38


Model: SAS (Automatic Shutter Extractor Fan)

A distinctive feature of the SAS fan is the automatic shutters (Please allow 40 secounds to open and fully close).

This design is necessary to combat reverse traction and is indispensable for rooms where regular, but not constant ventilation is needed.

SAS is also has other options: timer & humidity sensor. 

This will help the unit with changes within the room and respond.

IP Rating: IP24



Types/Spigot Size

SAS100A - 100mm (4")
SAS125A - 120mm (5")
SAS150A - 150mm (6")

Standard Model (S) - Turns On/Off 

Timer Model (T) - When switched off will run on for the time set

Humidity Model (H) - Turns on and off with Humidity - If Switched Live is added fan will turn on for the time set then off (even if power is still applied to T Terminal) once light is turned off fan will run again for the time set then off.

Wiring diagram 


Wattage
100 - 11w
125 - 15w
150 - 29w
Air Flow (Free Air)
100 - 85 m3/hr
125 - 130 m3/hr
150 - 230 m3/hr
Sound Level dBA (3m)
100 - 39
125 - 42
150 - 46
Model: SRD (Round Extractor Fan)
For constant or periodic exhaust ventilation of bathrooms, kitchens and other domestic compartments.

Case and impeller are made from the high-quality ABS-plastic, resistant to ultraviolet.

The motor is equipped with overheating protection.

Fixing to the mounting place is carried out by means of screws.

Types/Spigot Size

SRD100 - 100mm (4")
SRD125 - 125mm (5")
SRD150 - 150mm (6")

Models - Standard (S) & Timer (T)

Wiring diagram 


Wattage
SRD100 - 14w
SRD125 - 18w
SRD150 - 22w
Air Flow (Free Air)
SRD100 - 107 m3/hr
SRD125 - 190 m3/hr
SRD150 - 270 m3/hr
Sound Level dBA (3m)
SRD100 - 35
SRD125 - 36
SRD150 - 38

Login